General
KYN28 indoor metal-clad with drawable switchgear(hereinafter short as switchgear)is a complete power distribution device for 3.6~24kV,3-phase AC 50Hz,single-bus and single-bus sectionalized system. It is mainly used for power transmission of middle/small generators in power plants; power receiving, transmission for substations in power distribution and power system of factories, mines and enterprises, and starting of large high-voltage motor, etc., so as to control, protect and monitor the system. The switchgear meets IEC298,GB3906-91.In addition to be used with domestic VS1 vacuum circuit breaker, it can also be used with VD4 from ABB,3AH5 from Siemens domestic ZN65A,and VB2 from GE, etc., it is truly a power distribution device with good performance.
In order to meet the requirement for wall mounting and front-end maintenance, the switchgear is equipped with a special current transformer, so that the operator can maintain and inspect it in front of the cubicle.
Service condition
1. Air temperature: Maximum temperature: +40ºC; Minimum temperature:-15ºC
2. Humidity: Monthly average humidity 95%; Daily average humidity 90% .
3.Altitude above sea level: Maximum installation altitude: 1000M.
4.Ambient air not apparently polluted by corrosive and flammable gas, vapor etc.
5. No frequent violent shake
Conditions of use
Ambient temperature: 15ºC~+40ºC
Altitude: ≤1000m
Relative Humidity: daily average relative humidity :≤95%, daily average vapor pressure not exceeding 2.2KPa; monthly mean relative humidity≤ 90%;the average monthly water vapor pressure not exceeding 1.8KPa;
Seismic intensity:no more than 8;
Surroundings:air should not be obviously polluted corrosive or flammable gases,water vapor,no severe vibration place;
Under normal conditions of use specified beyond GB3906 ,negotiated by the user and the company.
The main technical parameters
Project | Unit | Parameter | ||
Rated voltage | KV | 3.6,7.2,12 | ||
Rated frequency | HZ | 50 | ||
Breaker rating | A | 630,1250,1600,2000,2500,3150 | ||
Switchgear rated current | A | 630,1250,1600,2000,2500,3150 | ||
Rated short time withstand current(4S) | KA | 20,25,31.5,40 | ||
1Rated peak withstand current(peak) | KA | 50,63,80,100 | ||
Rated short circuit breaking current | KA | 20,25,31.5,40 | ||
Rated short -circuit current(peak) | KA | 50,63,80,100 | ||
Rated insulation level 1min power frequency withstand voltage | Pole,the pole on the ground between | KV | 24,32,42 | |
Fracture between | KV | 24,32,42 | ||
Lighting impulse withstand voltage(peak) | Pole,the pole on the ground between | KV | 40,60,75 | |
Fracture between | KV | 46,70,85 | ||
Protection class | Shell IP4X,among compartment,when the circuit breaker compartment door open for the IP2X | |||
Company Introduction
Taili Brands, founded in 1992, Headquarters is located in China Electric Capital Yueqing City, Zhejiang Province, is an non-regional large power product development, and manufacturing enterprises, a total area of 30,000 square meters, more than 500employees, including its head office in Zhejiang Taili Electric Co., Ltd, Shanghai Taili Transformer Co., Ltd. Xian Erbian Transformer Co., Ltd. Taili Electric High pressure company. Wenzhou Tali import and export Co., Ltd.
The company has advanced production line equipment and superb manufacturing technology, professional technical back-bone, professional production of 10kV, 35kV, 110kV, 220kV class oil-immersed power transformers, 10kV, 35kV insulation level of cast resin dry-type transformers, H class insulation environmentally friendly dry-type transformers, oil-immersed amorphous alloy transformer, amorphous alloy resin insulation dry-type transformers, 6kV, 10kV level mine mobile substation, mining and oil-immersed three-phase transformers, vacuum circuit breakers and other high voltage transmission and distribution electrical products. Prefabricated substations, modular substation, wind power substation, low voltage switch cabinet and power transmission and distribution equipment, products widely used in electric power, railways, mining, shipping, and other fields.
Taili force people in a "people for the support, with the benefits of technology by the tree brand development" business principles, adhere to the" quality first, customer first, to meet user demand" for the purpose, and actively explore the domestic market, sales the country and exported to many countries and regions in Southeast Asia, the Middle East, and Africa.
ATTENTION:
1. The payment term: We accept TT,30% deposit and 70% balance against copy of BL.
2. The delivery time: Usually it will take about 15-20 days.
3. The standard of package: Usually use strong plywood case for protection.
4. The material of transformer: We have two types, one is with copper and another one is with aluminum. It depends on your requirement. In fact, those two have difference if normal work well. Only except the long life. Copper is better and also higher price.
5. The logo: If you have good quantity, it absolute no problem to do OEM.
6. Our market: our products are popular in Indonesia, Philippines, Russia, USA, Middle East and so on. Some of them are our regular customers and some of them are developing. We hope you can join us and make mutual benefit from our cooperation..
7. Warranty: in 12 month since BL date.
OUR SERVICE:
1. quick response in before sales period help you got order.
2. excellent service in production time let you know each step we made.
3. reliable quality solve you after sale headache.
4. long period quality warranty ensure you can buy without hesitate.
FAQ
Q1: Are you manufacturer?
A: Yes, we are manufacturer. Our factory is in Wenzhou China
Q2: Can I get guarantee of products?
A: Yes, every product is 1 year quality warrantee under customer correct using the products.
Q3: Do you have any Certificate?
A: Yes. Each of our unit has CCC, ISO9001 certificate. All the electric parts with CE certificate, If you need any other Certificate, we can help you to get it.
Q4: How to buy it? What about the delivery?
A: Please contact me by email or online, let me know your situation, I will give you professional solution. We have shipping agent can choosing the cheapest and fastest delivery. FOB, CIF, C&F or EXW are no problem for us.
Q5: What's the payment terms?
A: For small testing orders, we can accept Waster union, T/T and Credit card.
For mass orders, we accept t/t and L/C.
Q6: What about the production?
A: Produce time is 4~6weeks.
Q7: Could you offer some spare parts?
A: Yes, no problem.
Q8: What about the maintenance?
A: All the goods past the test, maintenance is very easy.